public interface ICableSublayer : EPLAN.Harness.API.Interfaces.IApiObject, I3DOccurrence, IControlPath, IControlPathWithEnds, IGraphicalOccurrence, IOccurrence, IReconnectable, IUserDefinedProperties
| Name | Description | |
|---|---|---|
 | BendingRadiiCheck | Gets or sets the value of the 'Bending radii check' property of this occurrence. |
| BendingRadius | Gets the bending radius of this occurrence. |
| CableLength | Gets the cable length of this occurrence. |
| Children | Gets children occurrences of closest level in hierarchy of this occurrence. (Inherited from EPLAN.Harness.API.Occurrences.Interfaces.IOccurrence) |
| ID | Identifier of the API object. (Inherited from EPLAN.Harness.API.Interfaces.IApiObject) |
| Interpolation | Gets or sets the interpolation algorithm of this occurrence. |
| IsRapid | Is the part a rapid prototype? (Inherited from EPLAN.Harness.API.Occurrences.Interfaces.IOccurrence) |
| IsTopLayer | Specifies if this cable's sublayer is the top layer of the cable. |
| IsValid | Is occurrence valid? (Inherited from EPLAN.Harness.API.Occurrences.Interfaces.IOccurrence) |
| Length | Gets the length of this occurrence. (Inherited from EPLAN.Harness.API.Occurrences.Interfaces.IControlPath) |
| Name | Gets or sets the name of the occurrence. (Inherited from EPLAN.Harness.API.Occurrences.Interfaces.I3DOccurrence) |
| OutsideDiameter | Get or set the outside diameter of this occurrence. Note: In the case of the rapid prototype cables, the outside diameter should be set on the top-level insulator. (Inherited from EPLAN.Harness.API.Occurrences.Interfaces.IControlPathWithEnds) |
| Parents | Gets parent occurrences of closest level in hierarchy of this occurrence. (Inherited from EPLAN.Harness.API.Occurrences.Interfaces.IOccurrence) |
| RawLength | Gets the raw length of this occurrence. |
| Selectable | Gets or sets the value of 'Selectable' property of this occurrence. |
| UserDefinedProperties | Gets or sets a list of user-defined properties of this occurrence. (Inherited from EPLAN.Harness.API.Occurrences.Interfaces.IUserDefinedProperties) |
| Name | Description | |
|---|---|---|
 | Equals | (Inherited from System.IEquatable<IOccurrence>) |
| GetConnectedPins | Gets pins to which this wire is connected. (Inherited from EPLAN.Harness.API.Occurrences.Interfaces.IReconnectable) |
| GetControlPoints | Gets all control point on this control path. (Inherited from EPLAN.Harness.API.Occurrences.Interfaces.IControlPath) |
| Reconnect | Reconnect this shield from one grouped pin to another. (Inherited from EPLAN.Harness.API.Occurrences.Interfaces.IReconnectable) |