System.Object
EPLAN.Harness.API.ApiObject
EPLAN.Harness.API.Occurrences.BaseOccurrence
EPLAN.Harness.API.Occurrences.Base3DOccurrence
EPLAN.Harness.API.Occurrences.BaseWsOccurrence
EPLAN.Harness.API.Occurrences.Workspace.BaseWsWire
EPLAN.Harness.API.Occurrences.Workspace.OccWsWire
public class OccWsWire : BaseWsWire, EPLAN.Harness.API.Interfaces.IApiObject, EPLAN.Harness.API.Occurrences.Interfaces.I3DOccurrence, EPLAN.Harness.API.Occurrences.Interfaces.IAutoRoutable, EPLAN.Harness.API.Occurrences.Interfaces.ICableUnitAddable, EPLAN.Harness.API.Occurrences.Interfaces.IComplexEntityAddable, EPLAN.Harness.API.Occurrences.Interfaces.IControlPath, EPLAN.Harness.API.Occurrences.Interfaces.IControlPathWithBendingRadiusFactor, EPLAN.Harness.API.Occurrences.Interfaces.IControlPathWithEnds, EPLAN.Harness.API.Occurrences.Interfaces.IElectricalOptionsMember, EPLAN.Harness.API.Occurrences.Interfaces.IEplanExportable, EPLAN.Harness.API.Occurrences.Interfaces.IExportable3D, EPLAN.Harness.API.Occurrences.Interfaces.IFixedLengthPath, EPLAN.Harness.API.Occurrences.Interfaces.IGraphicalOccurrence, EPLAN.Harness.API.Occurrences.Interfaces.ILibraryOccurrence, EPLAN.Harness.API.Occurrences.Interfaces.IOccurrence, EPLAN.Harness.API.Occurrences.Interfaces.IOccWire, EPLAN.Harness.API.Occurrences.Interfaces.IReconnectable, EPLAN.Harness.API.Occurrences.Interfaces.IReplaceable<LibWire>, EPLAN.Harness.API.Occurrences.Interfaces.IRoutable, EPLAN.Harness.API.Occurrences.Interfaces.ISegmentRoutable, EPLAN.Harness.API.Occurrences.Interfaces.ISpecialComponentHost, EPLAN.Harness.API.Occurrences.Interfaces.IUserDefinedProperties, EPLAN.Harness.API.Occurrences.Interfaces.IWire, EPLAN.Harness.API.Occurrences.Interfaces.IWireCommon, EPLAN.Harness.API.Occurrences.Interfaces.IWireElectricalOptions, EPLAN.Harness.API.Occurrences.Interfaces.IWireHarnessAddable
| Name | Description | |
|---|---|---|
 | BendingRadiiCheck | Gets or sets the value of the 'Bending radii check' property of this occurrence. |
| BendingRadius | Gets the bending radius of this occurrence. |
| CableUnit | Gets the cable unit in which this occurrence is included. |
| Children | Gets children occurrences of closest level in hierarchy of this occurrence. (Inherited from EPLAN.Harness.API.Occurrences.BaseOccurrence) |
| Color | Overridden. Gets or sets the color of this occurrence. |
| ConnectedPins | Overridden. Gets the names of pins to which this occurrence is connected. |
| CrossSection | Overridden. Get or set the cross section of this occurrence. |
| CustomizedTolerance | Gets or sets the 'Customized tolerance' property of this occurrence. |
| ElClass | Gets or sets the electrical class of this occurrence. |
| ElectricalOptions | Gets or sets the electrical options of this occurrence. |
| EplanExport | Gets or sets the value of the 'EPLAN export' property of this occurrence. |
| Exportable3D | Determines if this part is to be exported or not when using EPLAN.Harness.API.Projects.Documents.Designer.Export3DFile. |
| FixedLength | Gets or sets the 'Fixed length' property of this occurrence. |
| ID | ID of the HpD object. (Inherited from EPLAN.Harness.API.ApiObject) |
| Imprint | Overridden. Gets or sets the imprint of this occurrence. |
| InBom | Gets or sets the value of the 'In bill of material' property of this occurrence. |
| Insulation | Gets the value of the 'Insulation' property of this occurrence. |
| Interpolation | Gets or sets the interpolation algorithm of this occurrence. |
| IsRapid | Is the part a rapid prototype? (Inherited from EPLAN.Harness.API.Occurrences.BaseOccurrence) |
| IsValid | Tells you whether this object is valid or not. (Inherited from EPLAN.Harness.API.Occurrences.BaseOccurrence) |
| Length | Overridden. Gets the length of this occurrence. |
| LengthAnnotationVisibility | Specifies annotation visibility of cable/wire length. |
| LibraryPart | Gets the related library part from which this occurrence was derived. (Inherited from EPLAN.Harness.API.Occurrences.BaseOccurrence) |
| Manufacturer | Gets or sets the manufacturer's part number of this occurrence. |
| MaterialCode | Overridden. Gets the material code of this occurrence. |
| MaxCurrent | Gets the maximal current for this occurrence. |
| MaxVoltage | Gets the maximal voltage for this occurrence. |
| MinBendingRadiusFactor | Gets the minimum bending radius factor of this occurrence. |
| Name | Gets or sets the name of the occurrence. (Inherited from EPLAN.Harness.API.Occurrences.BaseOccurrence) |
| OutsideDiameter | Overridden. Get or set the outside diameter of this occurrence. Note: In the case of the rapid prototype cables, the outside diameter should be set on the top-level insulator. |
| Parents | Gets parent occurrences of closest level in hierarchy of this occurrence. (Inherited from EPLAN.Harness.API.Occurrences.BaseOccurrence) |
| RawLength | Gets the raw length of this occurrence. |
| RequiredLength | Gets or sets the required length of this occurrence. |
| RequiredLengthTolerance | Gets or sets the required length tolerance of this occurrence. |
| Resistivity | Gets the resistivity of this occurrence. |
| Selectable | Gets or sets the value of 'Selectable' property of this occurrence. |
| SeparationCode | Gets or sets the separation code of this occurrence. |
| SnapToRequiredLength | Gets or sets snapping cable/wire length to required length. |
| Strands | Gets the strands of this occurrence. |
| StripeColor | Gets the stripe color of this occurrence. |
| Supplier | Gets or sets the supplier's company name of this occurrence. |
| UserDefinedProperties | Overridden. Gets or sets a list of user-defined properties of this occurrence. |
| WireHarness | Gets or sets the wire harness in which this occurrence is included. |
| Name | Description | |
|---|---|---|
 | Equals | Overloaded. Determines whether the specified object is equal to the current object. (Inherited from EPLAN.Harness.API.Occurrences.BaseOccurrence) |
| GetConnectedPins | Overridden. Gets pins to which this wire is connected. |
| GetControlPoints | Overridden. Gets all control point on this control path. |
| GetHashCode | Serves as the default hash function. (Inherited from EPLAN.Harness.API.Occurrences.BaseOccurrence) |
| Reconnect | Overridden. Reconnect this shield from one grouped pin to another. |
| ToString | Returns a string that represents the current object. (Inherited from EPLAN.Harness.API.ApiObject) |
| Name | Description | |
|---|---|---|
 | AddToCableUnit | Add this occurrence to the cable unit. |
| AddToComplexEntity | Add this occurrence to the complex entity. |
| AddToWireHarness | Add this occurrence to the wire harness. |
| AutoRoute | Automatically route this routable object. |
| GetAllControlPoints | Gets all control points on the routable occurrence. |
| RemoveFromCableUnit | Remove this occurrence from any cable unit. |
| RemoveFromComplexEntity | Remove this occurrence from complex entity. |
| RemoveFromWireHarness | Remove this occurrence from any wire harness. |
| Route | Route this routable object through the given bundles. |
| SemiAutoRoute | Route this routable object between the given control points. |
| UnRoute | Unroute this routable object. |