This functionality is only available for certain module packages.

Setting the data basis

The information about which database is to be used is entered in the initialization file, e.g. ec.ini.

After a Stand-alone installation the initialization file contains the following entry for the data management per FastObejcts database:

-Dorg.foederal.sn.connectionURL=fastobjects://LOCAL/db
		
	

This entry should be changed for data management per EOX file as follows:

-Dorg.foederal.sn.connectionURL=eox:///{FolderWithEOXSlash}/{EOXFileName}?mode={r|rw}
		
	

Note:

If a certain EOX file is specified for data management, a change to another EOX file is not possible during operation.

Note:

If the path to the EOX file contains empty spaces, they must be replaced by %20. Since this is a URL also forward slashes / are used as path separators.

This entry should be changed for data management per EOX file as follows:

-Dorg.foederal.sn.connectionURL=proxy://any
		
	

During the running operation this setting allows to switch the database via the menu File > Switch back-end (see Changing the EOX back-end).