The T_Pro Panel_Ui discipline library, as well as the T_Mechatronic_Architecture and T_Mechatronic_ModularSystem libraries created in the ‘Mechatronics’ section, must be available before the Pro Panel discipline components are imported.

Based on the initial situation, various EOX files that contain the corresponding libraries must be imported:

• The model is empty, i.e., only the system libraries are available (also see Filter). Import the following EOX files:

<EEC-Installationsordner>\install\Tutorial\Mechatronic\Mechatronic.eox
<EEC-Installationsordner>\install\Tutorial\ProPanel\ProPanel_Ui.eox

• The model contains T_Mechatronic_Architecture and T_Mechatronic_ModularSystem but not T_Pro Panel_Ui. Import the following EOX file:

<EEC-Installationsordner>\install\Tutorial\ProPanel\ProPanel_Ui.eox

• The model contains T_Pro Panel_Ui but not T_Mechatronic_Architecture and T_Mechatronic_ModularSystem. Import the following EOX file:

<EEC-Installationsordner>\install\Tutorial\Mechatronic\Mechatronic.eox

Proceed as follows to import the required EOX files:

1. Start EEC
2. Select File > Import... (File > Import...).

The import wizard opens with the Import dialog:



3. Select Model > Import wizard for model files in Engineering Object Format (EOX Format).
4. Press Next > to confirm.



5. Select Add in the Mode panel.
6. Select the required EOX file in the Source panel.
7. Select the required libraries.
8. Press Finish to confirm.



9. Use the button to apply all incoming changes in the Synchronization view.
10. If necessary, repeat steps 2 to 9 and select the next EOX file that you need.