The function lists for the building automation can now also be output in BACnet-compliant representation according to the standards VDI 3814 and EN ISO 16484-5. In this form of representation the PCT loop functions not only describe the measuring and user functions but also the software functions of PCT loops.
For a BACnet-compliant representation a PCT loop function must be created for each software function (each PLC input and output) in the pre-planning navigator and the PCT loop functions must be located below the PCT loops. By default these PCT loop functions have a row in the PLC tab. The assignment of a PLC address is not necessarily required in this case.
For the output of function lists in BACnet-compliant representations the master data is supplied to you in corresponding forms.
See also