This functionality is only available for certain module packages. Info / Copyright

Storing Subprojects

In order to store subprojects mark the desired filed-off subprojects in the dialog Subprojects and click the [Store] button. Multiple selection of filed-off subprojects is possible.

During storing the pages, layout spaces and pre-planning segments are copied from the respective subproject 1:1 into the original project. In the process the respective objects (pages, layout spaces, etc.) in the original project are overwritten, the external cross-references removed and the change protection for the respective defined working section removed. The subproject number as the editor of a defined working section is removed in the dialogs for the defined working sections. The subproject as such no longer exists after storing.

Note:

If the protected defined working section was changed in the original project or if pages, layout spaces or pre-planning segments outside this defined working section were created in the subproject, a corresponding prompt is displayed whether the subproject should be stored nevertheless. At the same time module-specific check run messages are created in the message management. This allows you to stop storing and branch to the causing objects (pages, layout spaces, etc.) by means of the message management.

After a subproject has been stored, you may have to still correct the sorting of the structure identifiers and update or create the reports. Subsequently subprojects can again be generated and edited externally in the course of further editing by external editors.

See also