This functionality is only available for certain module packages. Info / Copyright

Tab Settings (Rittal - Wire Terminal WT)

In this tab, information on the technical options of the machine to be used is stored. The individual settings are pre-set with appropriate values in a machine-specific manner, and can be modified here.

Overview of the main dialog elements:

Wire length minimum:

Minimum length the machine requires to handle the wire as defined (default value: 230 mm). Shorter wires are transferred to the machine with this minimum length.

Wire length maximum:

Wires that are longer than specified here cannot be processed by the machine (default value: 10,000 mm).

Conductor cross-section minimum:

Minimum cross-section of a wire that the machine can still process (default value: 0.5 mm²).

Conductor cross-section maximum:

Maximum cross-section of a wire that the machine can still process (default value: 2.5 mm²).

Routing direction up / down / left / right:

Texts that are to be printed on the wire to indicate individual routing directions.