This functionality is only available for certain module packages. Info / Copyright

You are here: EPLAN Data Portal > EPLAN Data Portal Standard Functionalities > Utilizing the Rittal Therm Configurator

Utilizing the Rittal Therm Configurator

The EPLAN Data Portal allows you to link to the Rittal Therm configurator. This Rittal program can be used for the calculation of climate-control requirements of enclosures. By means of the configurator you can determine the required air-conditioning units in Rittal Therm and transfer them to the Shopping cart of the EPLAN Data Portal.

Procedure:

  1. To launch the Rittal Therm configurator, select Rittal as the manufacturer and then click the button under the toolbar.

Climate-control calculations within projects are performed with Rittal Therm. In a project, you enter the relevant data (power dissipation, max. external and internal temperature, etc.) for a selected enclosure housing to start the calculation. After the calculation and determination of the required cooling devices, you can import the required parts into the EPLAN Data Portal.

  1. Click the [Send configuration to EDP] button in the project summary.
  2. The main and accessory parts determined are carried over to the EPLAN Data Portal shopping cart. If there are already parts in the shopping cart, you are asked whether to empty the shopping cart first.
  1. Using the button of the toolbar of the shopping cart, you can then import these parts into the EPLAN-specific device list, and from there place them as devices in an opened layout space.

Note:

In order to launch the Rittal Therm configurator from within the EPLAN Data Portal, you must first have yourself registered at Rittal Therm (http://www.rittal.com/therm-online). Here you will obtain the required data to log onto the configurator.

See also

Part Configurators