This functionality is only available for certain module packages.

You are here: Tutorial > EPLAN Electric P8 > Create EPLAN Electric P8 components > Divide EPLAN Electric P8 schematic into macros > Create window macro for page > Insert function texts in page

Insert function texts in page

The function texts of the PLC inputs are to be inserted by the EEC while creating. Therefore, the existing texts are replaced by function texts:

  1. Double-click the Separator in back position function text of input I0.0.

The Properties (components) PLC connection points and bus ports) window opens.

  1. In the Function text field, replace the existing text with the following text:
  1. Confirm with [OK].
  2. Repeat steps 1 to 4 for each further PLC input, and use ascending numbers for the function texts (<Functiontext2>, <Functiontext3>, etc.).