| Name | Description | |
|---|---|---|
 | Anchored | Switch on or switch off the anchor. (Inherited from EPLAN.Harness.API.Occurrences.Workspace.BaseWsConnectableObject) |
| BaseMaterial | Base material. |
| CableUnit | Gets the cable unit in which this occurrence is included. |
| CavityPlugRequired | Gets or sets the value of the 'Cavity plug required' property of this occurrence. (Inherited from EPLAN.Harness.API.Occurrences.Workspace.BaseWsConnectableObject) |
| CavitySealRequired | Gets or sets the value of the 'Cavity seal required' property of this occurrence. (Inherited from EPLAN.Harness.API.Occurrences.Workspace.BaseWsConnectableObject) |
| Children | Gets children occurrences of closest level in hierarchy of this occurrence. (Inherited from EPLAN.Harness.API.Occurrences.BaseOccurrence) |
| Coating | Gets or sets the value of the 'Coating' property of this occurrence. |
| CrimpApplicator | Crimp applicator assigned to this wire terminal. |
| CrossSection | Get or set the cross section of this occurrence. |
| ElectricalOptions | Gets or sets the electrical options of this occurrence. (Inherited from EPLAN.Harness.API.Occurrences.Workspace.BaseWsConnectableObject) |
| EplanExport | Gets or sets the value of the 'EPLAN export' property of this occurrence. |
| Exportable3D | Determines if this part is to be exported or not when using EPLAN.Harness.API.Projects.Documents.Designer.Export3DFile. (Inherited from EPLAN.Harness.API.Occurrences.Workspace.BaseWsConnectableObject) |
| FixedExtraLength | Gets the fixed extra length of this occurrence. (Inherited from EPLAN.Harness.API.Occurrences.Workspace.BaseWsConnectableObject) |
| Gender | Gets the gender of this occurrence. (Inherited from EPLAN.Harness.API.Occurrences.Workspace.BaseWsConnectableObject) |
| GroupedPin | Gets grouped pin of this connectable object, if exists. (Inherited from EPLAN.Harness.API.Occurrences.Workspace.BaseWsConnectableObject) |
| ID | ID of the HpD object. (Inherited from EPLAN.Harness.API.ApiObject) |
| InBom | Gets or sets the value of the 'In bill of material' property of this occurrence. (Inherited from EPLAN.Harness.API.Occurrences.Workspace.BaseWsConnectableObject) |
| InsulationCrimp | Is insulator crimp?Is the insulator a crimp? |
| IsRapid | Is the part a rapid prototype? (Inherited from EPLAN.Harness.API.Occurrences.BaseOccurrence) |
| IsValid | Tells you whether this object is valid or not. (Inherited from EPLAN.Harness.API.Occurrences.BaseOccurrence) |
| KeyPoints | Key points of the geometry of this occurrence. (Inherited from EPLAN.Harness.API.Occurrences.Workspace.BaseWsConnectableObject) |
| LibraryPart | Gets the related library part from which this occurrence was derived. (Inherited from EPLAN.Harness.API.Occurrences.BaseOccurrence) |
| Manufacturer | Gets or sets the manufacturer's part number of this occurrence. |
| MultipleSealRequired | Gets or sets the value of the 'Multiple seal' property of this occurrence. (Inherited from EPLAN.Harness.API.Occurrences.Workspace.BaseWsConnectableObject) |
| Name | Gets or sets the name of the occurrence. (Inherited from EPLAN.Harness.API.Occurrences.BaseOccurrence) |
| OutsideDiameter | Get or set the outside diameter of this occurrence. Note: In the case of the rapid prototype cables, the outside diameter should be set on the top-level insulator. |
| P8DisplayedDT | Gets the P8 displayed device tag. (Inherited from EPLAN.Harness.API.Occurrences.BaseOccurrence) |
| P8FullDT | Gets the P8 full device tag. (Inherited from EPLAN.Harness.API.Occurrences.BaseOccurrence) |
| P8FunctionText | Gets the P8 function text. (Inherited from EPLAN.Harness.API.Occurrences.BaseOccurrence) |
| Parents | Gets parent occurrences of closest level in hierarchy of this occurrence. (Inherited from EPLAN.Harness.API.Occurrences.BaseOccurrence) |
| Pins | Get all pins (graphical and virtual), but without grouped pin. (Inherited from EPLAN.Harness.API.Occurrences.Workspace.BaseWsConnectableObject) |
| Position | Gets (or sets) the position of this occurrence. (Inherited from EPLAN.Harness.API.Occurrences.Workspace.BaseWsConnectableObject) |
| PullOffForce | Force to pull off. |
| RefDes | Gets or sets the RefDes of this occurrence. (Inherited from EPLAN.Harness.API.Occurrences.Workspace.BaseWsConnectableObject) |
| Rotation | Gets (or sets) the rotation of this occurrence. (Inherited from EPLAN.Harness.API.Occurrences.Workspace.BaseWsConnectableObject) |
| Selectable | Gets or sets the value of 'Selectable' property of this occurrence. (Inherited from EPLAN.Harness.API.Occurrences.Workspace.BaseWsConnectableObject) |
| StrippingLength | Gets or sets the stripping length of this occurrence. (Inherited from EPLAN.Harness.API.Occurrences.Workspace.BaseWsConnectableObject) |
| StructurelessRefDes | Gets or sets the structureless RefDes of this occurrence. (Inherited from EPLAN.Harness.API.Occurrences.Workspace.BaseWsConnectableObject) |
| Supplier | Gets or sets the supplier's company name of this occurrence. |
| UserDefinedProperties | Gets or sets a list of user-defined properties of this occurrence. (Inherited from EPLAN.Harness.API.Occurrences.Workspace.BaseWsConnectableObject) |
| WireHarness | Gets or sets the wire harness in which this occurrence is included. (Inherited from EPLAN.Harness.API.Occurrences.Workspace.BaseWsConnectableObject) |
| WireHarnessSeparator | Gets or sets the value of the 'Wire harness separator' property of this occurrence. (Inherited from EPLAN.Harness.API.Occurrences.Workspace.BaseWsConnectableObject) |
| WireTerminalOnPinRequired | Gets or sets the value of the 'Wire terminal on pin required' property of this occurrence. (Inherited from EPLAN.Harness.API.Occurrences.Workspace.BaseWsConnectableObject) |
| WireTerminalRequired | Gets or sets the value of the 'Wire terminal required' property of this occurrence. (Inherited from EPLAN.Harness.API.Occurrences.Workspace.BaseWsConnectableObject) |
| WithProtection | With protection? |
