Open topic with navigation

This functionality is only available for certain module packages.

Insert function texts in page

The function texts of the PLC inputs are to be inserted by the EEC while creating. Therefore, the existing texts are replaced by function texts:

  1. Double-click the first PLC input I0.0.

The Properties (component) PLC and bus ports window opens.

  1. In the Function text field, exchange the text with the following:
<Functiontext1>
  1. Confirm with [OK].
  2. Repeat steps 1 to 4 for each further PLC input, and use ascending numbers for the function texts (<Functiontext2>, <Functiontext3>, etc.).