This functionality is only available for certain module packages. Info / Copyright
If you have opened or continued an EPLAN project of the type *.EPDZ, this project can consist of multiple layout spaces. Furthermore, a layout space can contain multiple enclosures whose mounting layouts can be connected electrically, for example in the case of enclosure baying systems. A layout space selection and enclosure selection are available so that you can select the desired routing connections and mounting layouts for your wiring work in EPLAN Smart Wiring:
Selecting layout spaces
You select layout spaces via the red field at the lower margin of the 3D viewThe 3D view is a separate display area in EPLAN Smart Wiring. This is always visible when 3D information is available in the loaded project.. If arrow symbols appear in this field, the currently open or continued project has multiple layout spaces.
Procedure
- Click or tap the right arrow to switch to the next layout space or the left arrow to switch to the previous layout space.
- The name of the selected layout space is output in the red field.
- In accordance with your selection all the routing connections of the layout space are displayed in the connection list.
- The mounting layout of the selected layout space is displayed in the 3D view.
Tip
The Layout spaceA layout space is a 3D display area showing placed devices. It can be used for viewing and editing 3D data. The layout space is independent from a project page. menu item is available in the menu of the application. This menu item provides you with a preview of all layout spaces contained in the project, if more than one layout space is available. Via [OK] you get to the routing connections of the selected layout space and can edit their wiring status.
Selecting enclosures
You select enclosures via the button in the search and filter bar of the connection list.
Preconditions
- You have specified the Single wiring mode in the settings.
- The project contains at least one layout space that contains the mounting layout of at least two enclosures.
Procedure
- Select the desired layout space.
- In the search and filter bar of the connection list click or tap the symbol .
- In the subsequent dialog select one of the three possible options:
<Enclosure identification> |
With this you select one particular enclosure in the layout space.
|
All |
With this you select all the enclosures contained in the layout space.
|
All cross-enclosure routing connections |
With this you select all the enclosures contained in the layout space.
|