Preconditions:
- You have opened a project.
- You have opened a page in the graphical editor.
- You have specified a scheme for editing in tables.
Tip:
You can also select objects in the navigators or pages or the entire project in the page navigator. In this case, the graphic editor may not be open.
- Select the required functions or connections, and select the menu items Edit > In table.
In the Edit function data dialog, the data of the highlighted functions and connections are displayed in a table format in the Functions and Connections tabs. - Select a different scheme as needed to change the display of the columns.
- Change the desired properties in the corresponding fields.
- Close the dialog via , or click another (open) dialog.
The changed data is adopted.
Notes:
- If you modify the selection while the dialog is open, you must update the display in the dialog via the Edit in table popup menu item.
- If you modify the value of a connection property on the Connections tab, this changed value will be carried over both to the connection and to all associated connection definition points where the property was filled. Empty properties are not overwritten.
- If the connection does not have connection definition points, and you modify the value of a property, a connection definition point will be placed automatically, and the property value will be entered there.
You would like to change the technical characteristics in all contactor coils on circuit diagram page "=AP+ST1/3". To do so, select a contactor coil, and select the Highlight objects of same type popup menu item. All contactor coils on the page are selected. Then, select the Edit in table popup menu item. The data from the contactor coils is down in the Edit function data dialog.
For the first contactor coil, enter the value "24-240V" in the Technical characteristics field. Then, copy the value via the popup menu, select the cells in the Technical characteristics column for the other coils, and paste the value there using the popup menu. After this change is made, click on the graphical editor once with the mouse. The changed technical characteristics will immediately be shown on the coils.
See also