You have opened a project.
- Page > Navigator. One or more pages are selected.
- Project data > Devices > Navigator. One or more devices are selected.
Project data > Devices > Number. In the Number (offline) dialog, select the Preview of results check box. Click [OK].
In this dialog, a preview of the numbering results is provided. All numbered main and auxiliary functions are displayed which contain a displayed DT. Functions that contain no displayed DT, but rather accept one from elsewhere, are not listed here. You can manually change the device numbering here. If you assign a different DT to a numbering function, you can also change the cross-reference.
Overview of the main dialog elements:
In this table, there is a row for each numbered function. The following columns are fixed:
- Error: If an error occurs in the device numbering, a cell in this column is highlighted in red. If the field is selected, the error status is printed in the Message description field.
- Name (identifying): Provides the identifying name of the function.
- All connection point designations: Shows the connection point designations of the function.
- New DT: Shows how the DT looks after numbering. You can change the DT in this column.
- Function text (automatic): Outputs the function text.
- Placement: Specifies the page on which the function is placed.
Other columns can be added in the popup menu with Configure representation.
The popup menu provides - depending on the field type (date, integer, multilingual, etc.) - the following menu items:
In addition, the following dialog-specific popup menu items are available:
Menu item |
Meaning |
---|---|
Use original DT |
Assigns a device its original identifier again after renumbering. |
A message is printed for each selected line in which an error occurred. You can ignore the error or correct it.
See also