This functionality is only available for certain module packages. Info / Copyright

Dialog Number using PLC data: Preview of result

In this dialog, a preview of the numbering results is provided. The designations of terminals and pins and the device tags of general devices will be shown in two separate tabs.

Overview of the main dialog elements:

Tab Terminal and pin designations / Tab Devices:

In the Terminal and pin designations tab, the designations of terminals and pins are shown before and after the numbering.

In the Devices tab, all numbered main and auxiliary functions are displayed which contain a displayed DT. Functions that contain no displayed DT, but rather accept one from elsewhere, are not listed here. You can manually change the device numbering here. If you assign a different DT to a numbering function, you can also change the cross-reference.

The table contains a row for each numbered function. The following columns are always displayed:

Other columns can be added in the popup menu with Configure representation.

Popup menu:

The popup menu provides - depending on the field type (date, integer, multilingual, etc.) - the following menu items:

In addition, the following dialog-specific popup menu items are available:

Menu item

Meaning

Use original designation / DT

Here you can reassign the original designation or DT to a terminal or pin or device after numbering.

Message description:

A message is printed for each selected line in which an error occurred. You can ignore the error or correct it.

See also