This functionality is only available for certain module packages. Info / Copyright

Working with Assemblies

An assembly is a collection of parts belonging to one device (e.g., a pushbutton with an NO contact, the appropriate bracket, and the pushbutton head). The assembly has its own part number and can contain subassemblies. The parts contained in assemblies also contain information about part variants. Specially for device selection and for reports, then, the technical data for variants will also be taken into account.

Assign assembly positions

Preconditions:

  1. Click on (New) to generate a line in the list of assembly positions.
  2. Select the desired part from the tree or list structure of parts selection.
    Multiple selection is not possible here, i.e., the uppermost selected part is always used.
  3. Click [OK].
  4. Repeat these steps for each additional assignment.
  5. If you want a distributed placement of the assembly in the 3D mounting layout, activate the Distributed placement of assembly check box.
  6. Click [Apply] to write the entries and changes to the database without leaving parts management.

Note:

The default setting for a new line is taken from the line currently selected, i.e., its data on number and part number is used. If no entry is marked, then an empty line (with a default Quantity = "1") will be generated.

See also