This functionality is only available for certain module packages. Info / Copyright

Dialog Synchronize pre-planning data

In this dialog the segments from the data source to be imported are displayed in a table and compared with the segments existing in the project. The displayed scope can be limited by using filters. Depending on the displayed status information you specify the action to be carried out with the segments.

Overview of the main dialog elements:

Filter:

This drop-down list displays all the available filters. A chosen filter is activated automatically. The "- Not activated -" entry deactivates the filter and causes an unfiltered display of the data. Click [...] to open the Filter dialog. Here you can create, edit, delete, copy, export, import, and manage filters.

The popup menu of the Filter drop-down list contains the following entries:

This allows you to toggle rapidly between the unfiltered representation and a representation filtered in accordance with your requirements.

Value:

Use this field, via Quick input, to adjust quickly the value of a filter criterion for a defined and activated filter.

Note:

Please note that an activated filter does not influence the import. The complete file is always imported on the basis of the set actions. It is therefore advisable to deactivate all the filters before the import and to check the actions specified in the table.

Table:

The contents of the selected import file are displayed in the table. The column headers correspond to the assigned EPLAN properties. In addition the following columns are always displayed:

Filter (status):

Here you can filter the segments to be imported in accordance with their status information in addition to the filter set above. The following values are possible: