Dialog Select structure

In this dialog you specify the location where a PCT loop / PCT loop function in the structure is placed in the structure of the pre-planning and whether a newly inserted PCT loop / PCT loop function is to be inserted in the process.

When macros or copies are inserted, other segments from the pre-planning in addition to PCT loops / PCT loop functions are also taken into consideration in this dialog (containers, planning objects, piping planning objects, etc.). You can also specify for these segments at which point in the structure they are positioned. When the terms "PCT loop / PCT loop function" are used in the subsequent text, this also applies correspondingly for these segments.

Overview of the main dialog elements:

Source:

In the Tree tab the superior structure of the PCT loops / PCT loop functions in which these are sorted in the source project or in the macro is displayed hierarchically.

The higher-level structures and the inserted PCT loops / PCT loop functions are displayed in a table in the List tab. The columns of this list correspond to the column configuration of the pre-planning navigator.

Sorting into the structure by means of multiple selection is only possible if the PCT loops / PCT loop functions are not marked simultaneously with their superior nodes.

Project:

This tree displays the structure of the target project in which the PCT loops / PCT loop functions are inserted. All placed and unplaced segments are displayed.

Arrow buttons:

Button	Meaning
(Insert)	Allows for the PCT loop / PCT loop function highlighted in the Source field to be inserted below the segment highlighted in the Project field. If a superior segment is highlighted in the Source field, the complete structure below this selection will be inserted into the target project.
(Assign)	Allows you to assign a segment marked in the Project field to the segment marked in the Source field if their basic segment definitions match. This way, you can place a PCT loop / PCT loop function that already existed in the pre-planning together with the inserted graphic. The assigned segment is then emphasized in bold in the Project field, and identified by a status icon. If, on such a segment in bold, you click the button, the assignment is undone.
(Undo)	This allows you to undo the insertion of a PCT loop / PCT loop function. The PCT loop / PCT loop function highlighted in the Project field is moved, together with its superior structure, back to the Source field.

Tip:

You can also move PCT loops / PCT loop functions from the Source field to the Project field using Drag & Drop. If a superior segment is highlighted in the Source field, the complete structure below this selection will be inserted into the target project.

A segment highlighted in the Project field can be assigned to a segment in the Source field using Drag & Drop by keeping the shortcut keys [Ctrl] + [Shift] pressed while dragging. The assignment is possible only if the basic segment definitions of the segments match.

Popup menu:

Through the popup menu in the Project field it is possible to immediately create new structures and to edit existing segments when inserting PCT loops / PCT loop functions into a P&I diagram.

Menu item	Meaning
New structure segment	The menu item is only available if a structure segment has been highlighted. Allows a structure segment to be created.
Properties	Opens the Properties (components): <...> dialog. Allows you to edit the properties of the segment.

Number new PCT loops:

This setting is only effective for PCT loops / PCT loop functions. The other segments are ignored.

If this check box is activated, the numbers in the PCT loop designations of the newly inserted PCT loops / PCT loop functions are numbered. In the process the settings for numbering in the Numbering / Availability tab of the dialog Configure segment definitions are used.

If this check box is disabled, the PCT loop designation remains completely unchanged.