This functionality is only available for certain module packages. Info / Copyright

Determining the PLC Address of Terminals / Pins

For terminals and pins it is possible to determine the attached PLC connection points and output their PLC addresses in terminal or plug diagrams. To do this, the PLC address on the terminal or the pin is entered in the Connected PLC address (automatic) property. In the Connected PLC address property you can manually enter PLC information that is then displayed in the terminal or plug diagram.

EPLAN proceeds with the search as follows:

Tip:

In order to avoid ambiguities in PLC addresses during the search, it is wise to define the internal side of the terminal such that points towards the PLC connection point.

See also