This functionality is only available for certain module packages. Info / Copyright

Configure hose lines

The hose line data read into the Configure hose lines dialog as a rule only contain the complete DT of the hose lines. In order to generate norm-compliant Hose line identification and a norm-compliant Type code for each hose line, further properties have to be added to the incomplete hose line information and values assigned to these, i.e. configured. The Edit <...> dialog is available to this purpose. During editing you access the properties and values set in the selected scheme. The Block editing function allows you to edit the data of several hose lines simultaneously in this dialog.

Preconditions:

  1. In the add-on variant select the menu items Extras > Settings or in the stand-alone variant the menu items Options > Settings.
  2. In the Settings: Hose line configurator dialog you select the desired scheme, for example the default preset scheme DIN 20066 with which you can generate the hose line identification and the type code in accordance with the specifications of DIN 20066.
  3. Click [OK].
  4. Double-click a row with a complete DT in the Configure hose lines dialog.
  5. Carry out the desired entries in the fields of the Edit <...> dialog.
  6. Click [OK].

    The edited hose line data are entered in the table of the Configure hose lines dialog.
  7. In the add-on variant of the hose line configurator close the Configure hose lines dialog with [OK].

    After editing the hose line data are written back into the project and saved at the marked hose lines. (This is only possible if you have read in the hose line data from an opened schematic page of a project before editing and the respective hose lines are still marked in the schematic.)

See also