Open topic with navigation

This functionality is only available for certain module packages. Info / Copyright

P004013: Rack '<x>': Ring connection

Cause

The rack name and the specification of the rack name for the PLC card slot reference one another for two different PLC boxes.

This check run only checks PLC boxes at which a configuration project is entered.

ClosedExample:

For the first PLC box, the Rack field contains the designation BGT1 and the PLC card is placed on rack ID field contains the designation BGT2. For the second PLC box, the Rack field contains the designation BGT2 and the PLC card is placed on rack ID field contains the designation BGT1.

Solution

Change the bus data in the Properties <...> dialog for both PLC boxes so that the rack names do not link up.

Then start a new check run.