Cause
A device tag that does not conform to the specified online numbering format was found.
Example:In the project you have specified the online numbering format 'Identifier + counter' for general devices. You have deviated from this numbering format and assigned the device tag -FA to a fuse placed in the schematic. As the 'A' following the 'F' is not a number, the program internally assigns it to the identifier. The missing counter causes the message to be output.
Solution
- Locate the DT in question in the project using the Go to (...) functionalities offered by the popup menu of the Message management dialog.
- Open the property dialog for the function and on the first tab, click [...] next to the Full DT field.
- In the Full DT dialog, check the subdivision of values in the DT group box (Prefix, Identifier, Counter and Subcounter fields), and note them if necessary.
- Close the property dialog.
- Select the Options > Settings > Projects > "Project name" > Devices > Numbering (online) menu items.
- Click [...] next to the Numbering format drop-down list in the On symbol insertion group box in the dialog Settings: Numbering (online).
- In the Numbering formats dialog, display the DT format of the device that caused the message output for the scheme used.
- To do this, click the [...] button of the relevant device type, for example in the General device field.
- In the DT format dialog, check the format elements selected and their position.
- Compare the DT format with the DT subdivision for the device that you noted previously.
- Close all the dialogs in the settings and change the device tag for the function according to the format elements defined for online numbering.
- Then start a new check run.
Note:
The following items relating to the online numbering format are checked in the DT when inserting symbols:
- The presence of a number in the DT if the corresponding format element is of the "counter" type.
- The presence of the correct page name in the DT after a function has been placed in the schematic, if the numbering format 'Page + identifier + counter' is specified.