Cause

During the export of the NC machining data, a missing setting was discovered.

Which setting is missing is indicated by the placeholder <x> in the message. The following placeholders are possible:

• The outline definition does not contain an NC outline record for the machine
• The outline definition does not contain NC outline records
• The outline definition was not found
• No tool for drill hole D<value a>
• No tool for thread M<value a>
• Cut-out <Form variant> too small for selected tool
• Alternative drill hole D<value b> produced for drill hole D<value a>
• Alternative drill hole D <value a> is milled
• Alternative thread M<value b> produced for thread M<value a>
• Alternative thread M<value b> drilled for thread M<value a>
• Alternative core hole D<value b> milled for thread M<value a>
• Slotted hole with identical values for height and length was not exported
• Rotated restricted drilling area cannot be exported.

Additional information:

• Value a = value of diameter to be produced (from placement)
• Value b = value of diameter which is actually produced
• Form variant = placeholder for the forms "Rectangle", "Slotted hole", "Octagon", "Hexagon"
• Regarding "Slotted hole with identical values for height and length was not exported.": The drilling pattern was not defined correctly in the parts database.
  

Solution

1. Complete and / or modify the setting for the export of the NC machining data in correspondence with the placeholder.
   
   "Slotted hole with identical values for height and length was not exported.": Change the drill type to "Drill".
   
2. Export the NC machining data again.