Open topic with navigation

This functionality is only available for certain module packages. Info / Copyright

P028010: The data of the PLC connection point differ from the data of the PLC address in the pre-planning

Cause

Identification occurs via the CPU name and the symbolic address. The address, function text, data type, and direction can deviate. The direction of the connection point is determined from the function definition.

Solution

  1. Synchronize the data of the PLC connection point with the data of the PLC address in the pre-planning, or assign the data of the PLC address to the PLC connection point in the detail planning.
  2. Then start a new check run.