Preconditions:

• You have opened a project.
• The project contains pages in which functions have been placed.
• You have opened the page navigator: Page > Navigator

Copy or cut

1. Double-click a schematic page in the Pages - <Project name> dialog.
2. Select the menu item Edit > Select > Area.
3. With the left mouse button pressed, pull a rectangle around all the schematic elements that you wish to copy or cut.
4. Select the menu item Edit > Copy or Edit > Cut.

Insert at a position

1. In the Pages <Project name> dialog, double-click the schematic page where you wish to insert the schematic elements.
2. Select the menu items Edit > Paste.
3. Click the position in the schematic where the schematic elements from the EPLAN Clipboard are to be inserted.
   
   If the With prompt option is selected in the Settings: Numbering (online) dialog, the Insertion mode dialog opens.
4. Define the manner in which the schematic elements are to be numbered and click [OK].

Insert at multiple places

1. If you wish to insert schematic elements at further positions, click again in the schematic.
   
   The selected insertion mode does not change.
2. To change the selected insertion mode, press [Esc].
   
   The action will be canceled.
3. Select the menu item Edit > Paste and insert the schematic elements in the same manner.
   
   In this procedure, you can again specify the manner in which the schematic elements are to be numbered, using the Insertion mode dialog.

See also

Specifying Online Numbering Format

Automatically Numbering New Devices

Excluding Device Groups from Automatic Numbering

Inserting Devices in Macros / Copies with Unchanged DT