Dialog call:You have opened a project. Project data > PLC > Export data. You have selected an AutomationML export format from the Format of export file field and then clicked [Options].
In this dialog you specify the degree of detailing for an export file in the AutomationML format.
Overview of the main dialog elements:
Export port-specific interconnection:
This setting is only relevant for Ethernet-based bus systems.
If this check box is activated, the interconnection of the bus ports is output in detail in the export file. In addition to the information about which PLC boxes are connected together, the information which bus port at the first box is connected with which bus port at the second box is output.
If the check box is deactivated, only the information which PLC boxes are connected together is output. The information which bus port is connected with which other one is not output.
If this check box is activated, the accessory parts are output as well in the export file. All parts that are entered at the positions 2 to 50 on the Parts tab in the property dialog of a main function are considered to be accessories.
Note:
A PLC type designation must be entered for these parts in the parts management to allow export of the accessory parts.
If the check box is deactivated, accessory parts are ignored.
See also