Dialog Potentials - <Project name>

In this dialog, the potentials, signals, and nets defined in the project are displayed in the tree or list view, as desired.

Overview of the main dialog elements:

The potentials, signals, and nets, as well as the placed potential definition points and net definition points are displayed in a hierarchical structure in the tree view.

Icon	Meaning
	Identifies the project level. This icon is only displayed when several projects are open.
	Potential
	Signal
	Placed potential definition point
	Net
	Placed net definition point

(An overview on the most important icons for project data can be found in the Icons in the Navigators topic.)

By default, the potential name, signal name, net name, and the placement are displayed in the list view. Other properties can also be displayed, e.g., potential value and frequency.

When you select a potential or net definition point from the tree or list view, its placement is shown in the graphical preview.

Note:

Nets without net names or net definitions are not displayed in the potential navigator.

Filter:

This drop-down list displays all the available filters. A selected filter is automatically activated and is applied to both the tree and the list view. The "- Not activated -" entry deactivates the filter and causes an unfiltered display of the data. Click [...] to open the Filter dialog. Here you can create, edit, delete, copy, export, import, and manage filters.

The popup menu of the Filter drop-down list contains the following entries:

Deactivate: This popup menu item is available if a filter has been set: Resets the filter setting to the "- Not activated -" entry.
Activate <filter name>: This popup menu item is available if the filter setting is "- Not activated -": Reactivates the last active filter.

This allows you to toggle rapidly between the unfiltered representation and a representation filtered in accordance with your requirements.

Value: <Property>:

Use this field, via Quick input, to adjust quickly the value of a filter criterion for a defined and activated filter.

Popup menu:

Menu item	Meaning
Select all (list only)	Selects all of the elements in the list.
Adjust column width (list only)	Adjusts the width of all table columns so that both the headings and column contents are fully legible.
Edit revision marker	This menu item allows you to edit the revision marker texts and their format. This menu item is only available when a changed object in a revision is selected.
Delete revision marker	This menu item allows you to delete the revision marker texts. This menu item is only available when a changed object in a revision is selected.
Delete	Following a prompt, this deletes all selected objects or - in the tree view - all objects below the selected tree structure level. (Multiple selection of objects or tree structure levels is possible here.) At the same time, the placement of the selected objects is deleted in the graphical editor.
Place	Allows the currently selected definition point to be placed on a page, i.e., to create a new definition point with the selected name. Before the actual placing press [Shift] in order to start the placement action in the mode "Individual functions". Before the actual placing press [Backspace] to open the dialog Place device and, if required, for example open the macro selection or change the representation type.
Go to (graphic)	Shows the selected object in the graphical editor.
Insert into list of search results	Enters all objects in a project referring to the selected element into the search results list.
Configure representation (list only)	Opens the Configure representation dialog in which you can define the properties to be displayed in the list.
Properties	Opens the Properties <...> dialog for the selected element.