In this tab, information on the technical options of the machine to be used is stored. The individual settings are pre-set with appropriate values in a machine-specific manner, and can be modified here.
Overview of the main dialog elements:
Minimum length the machine requires to handle the wire as defined (default value: 240 mm). Shorter wires are transferred to the machine with this minimum length.
Wires that are longer than specified here cannot be processed by the machine (default value: 3,000 mm).
Conductor cross-section maximum:
Maximum cross-section of a wire that the machine can still process (default value: 6 mm²).
Number of wires per bundle maximum:
Number of wires that the machine can combine into a bundle (default value: 1).
Total conductor cross-section maximum:
Limit value for the sum total of cross-sections of all wires (default value: 6 mm²).
Routing direction up / down / left / right:
Texts that are to be printed on the wire to indicate individual routing directions.
Continuous text from wire length:
Length from which wires are to be printed with endless text. If no value is entered, all wires will be printed with endless text.
Maximum number of characters that individual text can have (default value: 39).