All elements are allocated to different layers in EPLAN. This affects simple graphical elements as well as symbol graphics, autoconnecting lines, property placements, special text and other text elements. In the layer management, settings can be made for each layer defining whether it is to be displayed and/or printed, whether the text on this layer should be surrounded by a border, and whether the elements assigned to this layer can be edited.
In EPLAN, there are two ways of hiding particular elements from being displayed on the screen or from being printed: By identifying a layer or by identifying an element as visible or invisible. The Invisible drop-down list provides the 
(From layer), "Yes" and "No" options for the element concerned. Note that if an element is identified as visible or invisible, this will overwrite the setting for the layer!
The appropriate settings allow you to make the invisible elements visible or printable again (File > Settings > User > Graphical editing > 2D). To make it possible to recognize which visible elements are actually "invisible", a special color setting is available for invisible elements.
Layer names and descriptions
Layers have a layer name and a layer description. The layer name must be unique, as it identifies a layer in EPLAN. The names and descriptions of the standard EPLAN layers cannot be changed.
The tree view is created from the layer description. Points within the layer description are treated as substructures and create a sub-level in the tree. The uppermost nodes in the tree structure have standard names: "Graphic", "Symbol graphic", "Property placement", "Special texts" and "3D graphic".
Example:You create a layer for your own graphics with the name Layer 1 and the description MyLayers.MyGraphic. In the tree below the pre-defined nodes, the new node MyLayers is shown. Below it are the nodes MyGraphic with the new layer Layer 1.
Layer management
Layers are managed on a project basis, i.e. the properties of a layer are taken from the current project. If several graphical editors are open, this can mean that (e.g.) Layer 1 is visible in graphical editor 1 (Project 1), and invisible in graphical editor 2 (Project 2) .
Appropriate layers are predefined in EPLAN for graphical elements, symbol graphics, text, etc. Each individual element (e.g. a particular piece of text) can be allocated to a particular layer on the project pages using the properties dialog. The display and printing of all layers is freely configurable.
Layers are identified internally via their ID number. With the standard layers, the ID number is part of the layer name. Thus the layer EPLAN100 Graphic.General will have the ID number 100. User-defined layers have ID numbers from 1000 upwards. The ID number of a user-defined layer can be determined by exporting the layer configuration and searching the configuration file for the value of the entry "A1426" for the layer concerned, e.g. A1426="1000".
DXF / DWG export and import
For DXF / DWG export of pages, only the names of the layers are exported and not the layer descriptions.
If during DXF / DWG import the layers in the DXF / DWG files are recognized as EPLAN standard layers, then these standard layers are allocated to the imported layers and thus EPLAN's own description text is restored. If a layer is not recognized on import, then the layer is newly generated in the layer management for the specific project.
The Layers tab in the DXF / DWG settings is available for supporting layer comparisons when exporting and importing (File > Settings > User > Interfaces > DXF / DWG export and import). Here you can allocate the standard EPLAN layers as well as the user-defined project layers according to the appropriate CAD names. In this way, when exporting, you can (e.g.) replace the names of the EPLAN standard layers in the DXF / DWG files with the layer names used in AutoCAD.
Treatment of components
A component usually consists of a symbol (composed of graphical elements) and a set of property placements (text elements) that label the symbol. Since the components references in the schematic do not have their own layer, it cannot be hidden or revealed as a whole.
The individual graphical elements composing a symbol are located on one layer as a standard. This is the EPLAN300 layer for general symbol graphics. It is however possible that the graphical elements can be spread over different layers. In this way you can use different colors, line types, and line thicknesses in a single symbol. The individual elements can be changed, hidden and revealed over the entire project using the layer management.
For a few special elements (such as black boxes, structure boxes, shields, cable definition lines, cross-section definitions, etc.), only a graphical element is used instead of a symbol. Each graphical element can be revealed or hidden using the appropriate layer (e.g. EPLAN305; Symbol graphic.Black boxes) in the layer management. Additionally, text elements such as function or special text can be revealed or hidden via the layer management.
See also