You have opened a project.
- File > Settings > Projects > "Project name" > Connections > Connection numbering. Select the Display tab in the dialog Settings: Connection numbering.
- You have selected a connection in the graphical editor, or in the Connections - <Project name> navigator dialog. Or you have selected one or more pages or a project in the Pages - <Project name> navigator dialog. Tab Connections > Command group Connections > Place definition points > Button [...]. Select the Display tab in the dialog Settings: Connection numbering.
In this tab you specify the formatting for connection designations generated on the connection definition point.
Overview of the main dialog elements:
To this purpose the hierarchy levels Distance and Format are available. These can be opened by clicking the 
sign.
Distance hierarchy level
Specify the spacing of connection designations to vertical connection sections. The connection designation for vertical connection sections is fixed on the connection line. This setting allows you to move the position positively or negatively in a horizontal direction.
If the connection designation is docked to another property then the setting affects the entire block.
Specify the spacing of connection designations to horizontal connection sections.
Format hierarchy level
Select the desired text alignment from the drop-down list. The alignment defines where the insertion point relative to the text is located.
1: Upper left 2: Middle left 3: Basis left 4: Lower left |
| 9: Upper right 10: Middle right 11: Basis right 12: Lower right |
5: Upper center 6: Middle center 7: Basis center 8: Lower center |
For texts from imported EPLAN 5 projects, there are additionally the following special orientations:
- Special left
- Special right
- Special center
- JIC special left
- JIC special right
- JIC special centered.
With these settings, the texts are oriented as in EPLAN 5. The texts are moved downwards by 2 mm and – depending on the text direction – 5 mm in the X direction.
Regardless of the font size and angle, the text is moved 5 mm to the left for the Special left setting and 5 mm to the right for the Special right setting.
See also