Dialog call:You have opened a project. File > Settings > Projects > "Project name" > Cross-references / contact image > Display.
For each of the different page types, in this dialog you define which cross-references to other page types are to be displayed and in what order.
Overview of the main dialog elements:
Display device cross-references:
Here you select the page types for which cross-references to the main function are to be possible for each different page type by clicking 
in the individual columns and selecting an entry from the drop-down list.
The "Panel layout" setting allows cross-references between main functions in the schematic and placed parts on a Mounting panel to be created. The "Device tag list" setting creates cross-references between main functions in the schematic and the respective devices in the Device tag list.
Only show first cross-reference of each representation type:
Select this check box if the cross-references for the individual representation types should not be displayed in the form of a list but only the cross-reference of the first entered part. If the check box is deselected, then the lists are displayed.
Display overview cross-references:
In this group box you can specify the following settings:
-
From overview to schematic: Select this check box if cross-references from overviews to schematic pages are to be possible.
-
From schematic to overview: Select this check box if cross-references from schematics to overview pages are to be possible.
-
At supply connection points: Select this check box if cross-references at supply connection points are to be possible as well.
You use these settings, for instance, to display PLC cross-references between PLC connection points in the schematic and overview.
See also