This functionality is only available for certain module packages. Info / Copyright

P004095: Missing safety address

Cause

Although identified as relevant to safety, the Safety address: Target property does not have a value at a PLC box.

Solution

  1. Locate the PLC box in the schematic using the Go to (graphic) functionality that is provided by the popup menu of the Message management dialog.
  2. Open the property dialog of the PLC box.
  3. Bring the first tab to the front.
  4. Enter the desired value in the table of properties in the Safety address: Target field.
  5. Click [OK].
  6. If required, start a new check run.