The Settings: Connection numbering dialog has been extended with a filter for the potential type for this version. In addition, you now have the possibility to format the automatically placed connection definition points in accordance with the default property arrangement for manually inserted connection definition points. (A possible command path to this dialog is: File > Settings > Projects > "Project name" > Connections > Connection numbering.)
Filters for the potential type
In the Settings: Connection numbering dialog it is now also possible to exclude specific potential types from the connection numbering. The Filter tab has been extended by the Potential type field for this purpose. All available potential types of the connections are listed in this field. The check boxes of all potential types are activated by default. If you want to exclude the connections with specific potential types (for example, PE or SH) from the connection numbering, deactivate the associated check boxes.
Formatting automatically placed connection definition points like manually placed ones
In the dialog Settings: Connection numbering you can now specify that the connection designations of the automatically placed connection definition points are formatted in the same way as manually inserted ones. The Display tab has been extended by the Use default check box. If this check box is activated, the property arrangement "Default value (connection)" which is also used by default for manually inserted connection definition points is assigned to the connection definition points during execution of the commands Place definition points as well as Align and format. The settings in the table can then no longer be edited and are not used.
See also
Tab Filter