Parameters

Description

TYPE

Type of task to be carried out:
IMPORT: Importing parts (and other record types)
EXPORT: Exporting parts (and other record types)
EXPORTPARTS: Exporting a list of parts with the specified number of properties

EXPORTMANUFACTURERS: Exporting a list of manufacturers with the specified number of properties
EXPORTCONSTRUCTIONS: Exporting a list of drilling patterns with the specified number of properties

EXPORTCONNECTIONPATTERNS: Exporting a list of connection point patterns with the specified number of properties
EXPORTACCESSORYLISTS: Exporting an accessory list with the specified number of properties
EXPORTACCESSORYPLACEMENTS: Exporting a list of accessory placements with the specified number of properties

IMPORTFILE

The directory and the name of the file to be imported must be specified here. Applies only for IMPORT.

EXPORTFILE

The directory and the name of the file to be exported must be specified here. The system adds a file name extension automatically. Applies only to EXPORT.

FORMAT

Optional: File format (XPamImportXml, XPamExportXml or user-defined format). IXPartsImportExportEdz - Export to .edz and import from .edz.

XPamExportXml is the default value for the following task: TYPE: EXPORT.

XPamImportXml is the default value for the following task: TYPE: IMPORT.

PARTNUMBER

Optional: Is used to export parts. Part number of the part.

MANUFACTURER

Optional: Is used to export addresses. Full name of an address.

CONSTRUCTION

Optional: Is used to export drilling patterns. Name of the drilling pattern.

CONNECTIONPOINTPATTERN

Optional: Is used to export connection point patterns. Name of the connection point pattern.

ACCESSORYLIST

Optional: Is used to export accessory lists. Name of the accessory list.

ACCESSORYPLACEMENT

Optional: Is used to export accessory placements. Name of the accessory placement.

MODE

Optional: Import mode. Supported modes are:

• 0: Add new records only (default value)
• 1: Update existing records only
• 2: Update existing records and add new ones

When specifying an invalid value, the default value 0 will be used.

ADDITIONAL_LANGUAGE

Optional. Only applies if TYPE = IMPORT. If the value of this parameter is 1, the multilingual properties will be updated with other language values. If the parameter is left out, the file content will replace the values of multilingual properties.

FILTERSCHEME

Filter scheme for the export of parts.
The default value is empty. Using the scheme allows filtering and exporting of parts.

PROPERTYIDn

Part property number (ID). "n" in PROPERTYIDn is the number that corresponds to the nth number in PROPERTYVALUEn.

PROPERTYVALUEn

Value of the specified part property number. "n" in PROPERTYVALUEn is the number that corresponds to the nth number in PROPERTYIDn.