Precondition:
You have opened a project. You have opened an editor such as the graphical editor, the plot frame editor, etc.
Draw circles
Define circles through the center and the radius
- Select the following commands: Tab Insert > Command group Graphic >
(Circle). - Define the center of the circle.
- Pull the circle out from the center, and click the left mouse button to define the radius.
- End the action via the Cancel action popup menu item or via the [Esc] button.
Define circles through three points on the circumference
- Select the following commands: Tab Insert > Command group Graphic >
(Circle through 3 points). - Define the first, second and third point of the circumference consecutively.
- End the action via the Cancel action popup menu item or via the [Esc] button.
Draw arcs and sectors
Define arcs / sectors through the center and the radius
- Select the following commands: Tab Insert > Command group Graphic >
(Arc through center) or 
(Sector). - Define the center of the circle.
- Pull the circle out from the center, and click the left mouse button to define the radius.
- Define the first and second points of the arc or sector consecutively.
- End the action via the Cancel action popup menu item or via the [Esc] button.
Define arcs through three points on the circumference
- Select the following commands: Tab Insert > Command group Graphic >
(Arc through 3 points). - Define the first and second points of the arc consecutively.
- Pull the circle out from the center, and click the left mouse button to define the arc.
- End the action via the Cancel action popup menu item or via the [Esc] button.
Draw ellipses
- Select the following commands: Tab Insert > Command group Graphic >
(Ellipse). - Define the center of the ellipse.
- Pull the ellipse out from the center, and click the left mouse button to define the size of the ellipse.
- End the action via the Cancel action popup menu item or via the [Esc] button.
See also