Cause
In a project in which the product aspect is used for structuring, there are two overlapping structure boxes containing different structure identifiers with regard to one or several identifier blocks.
Example:
The structure box with identifier +O1 overlaps with the structure box which is characterized by =A1+E1. With regard to the device -F1, the structure identifiers are contradictory for the identifier block "Location designation" (O1 and E1).
Solution
Possibility 1
- Locate the first overlapping structure box in the schematic using the Go to (graphic) function from the popup menu in the Message management dialog.
- Call up the Properties <...> dialog of the structure box and bring the Identifier tab to the foreground.
- Adjust the structure identifier for the respective identifier block to the identifier structure of the second structure box and confirm with [OK].
Possibility 2
- Locate the second overlapping structure box in the schematic by using the functionality Go to (2nd coordinate), which the popup menu of the Message management dialog offers you.
- Call up the Properties <...> dialog of the structure box and bring the Identifier tab to the foreground.
- Adjust the structure identifier for the respective identifier block to the identifier structure of the first structure box and confirm with [OK].
If required, start a new check run.