In generating routing path networks, automatic routing paths are generated within wire ducts, at the ends, and for the purpose of bridging intermediate spaces between wire ducts. These automatic routing paths cannot be selected and edited. If the routing track is only to be defined by manually placed routing paths, the automatic routing paths can be removed from the routing path network prior to routing.
Precondition:
You have opened a project. A layout space is open. You have calculated the routing path network in the opened layout space.
- Select the following commands: Tab Edit > Command group Routing connections > Drop-down button Generate routing path network > Delete automatic routing path.
All automatic routing paths of the wire ducts are removed for the opened layout space.
See also