Routing path view is defined as the highlighting of the currently valid routing path network. The routing path view can be displayed in full or filtered through the respective valid connection filter.

1. Select the button Routing path view in the command group Routing connections in the View tab.
   
   The routing path view is displayed. All channels, routing tracks and routing paths through which a connection can run are highlighted.
   
   The transparency of all part placements in the layout space is set to 50%. The wire ducts and routing ranges involved in the currently valid routing path network are excluded from the transparency highlighting to make them more clearly visible. Automatic routing paths are not highlighted.
   

Connection filter for routing path view

In connection with the display of the routing path view, you can set in the connection filter the criteria to be considered for the routing path view. Routing ranges that correspond to the activated criteria are highlighted. Routing ranges that correspond to the non-activated criteria are displayed as transparent.

1. Select the button Connection filter in the command group Routing connections in the View tab.
   
   The Connection filter dialog is displayed.
2. Activate or deactivate the required criteria.
3. Click [OK].
   
   All ducts, routing tracks and routing paths through which a connection can run are highlighted if they meet at least one of the activated criteria. Tracks for which no criterion has been activated are represented as transparent.

See also

Tab Connection filter