Action: export3D

Parameters	Description
TYPE	Type of task that the action is to perform: STEPINSTALLATIONSPACES: Exporting layout spaces in the STEP format.
PROJECTNAME	Project name with complete file path (optional). If nothing is entered, the selected project will be used if the action is to be run over the user interface (e.g. via the script or ribbon). When executing from the Windows command line, PROJECTNAME must be specified or ProjectAction has to be used before that. Otherwise a system message will appear.
INSTALLATIONSPACENAME	Name of the layout space to be exported. This parameter has an effect only if the TYPE parameter has the following value: STEPINSTALLATIONSPACES.
INSTALLATIONSPACENAMEn	Name of the layout spaces to be exported (optional). Here n is a number, for example /INSTALLATIONSPACENAME1:LS1 /INSTALLATIONSPACENAME1:LS4 /INSTALLATIONSPACENAME1:LS7 etc. These parameters have an effect only if the TYPE parameter has one of the following values: STEPINSTALLATIONSPACES.
STRUCTURE	Structure identifier of the layout space to be exported (optional). This parameter has an effect only if the TYPE parameter has the following value: STEPINSTALLATIONSPACES.
STRUCTUREn	Structure identifier of the layout spaces to be exported (optional). Here n is a number, for example /INSTALLATIONSPACENAME1:LS1 /STRUCTURE1:=EB3+ET1 /INSTALLATIONSPACENAME2:LS2 /STRUCTURE2:=EB3+ET2 etc. These parameters have an effect only if the TYPE parameter has one of the following values: STEPINSTALLATIONSPACES.
DESTINATIONPATH	Target directory. For the STEPINSTALLATIONSPACES: Directory in which the STEP files are stored. If this directory does not exist yet, it will be created.
EXPORTSCHEME	Scheme for the STEP export of layout spaces (optional). If this parameter is not available or empty (""), the most recently used STEP export scheme is used. This parameter has an effect only if the TYPE parameter has the following value: STEPINSTALLATIONSPACES.
SEPARATEFILES	For TYPE = STEPINSTALLATIONSPACES:. When the value is 1, several layout spaces are exported into individual files. If the value is 0, individual files are generated whose names are generated on the basis of the Layout space name property.

Note:

If the specified layout space is not unique in the project and the STRUCTURE parameter was not specified, all the layout spaces are output with the same layout space name.