This functionality is only available for certain module packages. Info / Copyright

Action: label


Parameter

Description

PROJECTNAME 

Project name with complete file path (optional).
If nothing is entered, the selected project will be used if the action is to be run over the user interface (e.g. via the script or ribbon). When executing from the Windows command line, PROJECTNAME must be specified or ProjectAction has to be used before that. Otherwise a system message will appear.

CONFIGSCHEME 

Configuration scheme (optional).
Default value: most recently used configuration scheme.

FILTERSCHEME 

Filter scheme (optional).
Default value: most recently used filter scheme. If this parameter is not available then no filtering takes place.

SORTSCHEME 

Sorting scheme.
Default value: the name of the sorting scheme is taken from the configuration scheme. If this parameter is not available then no sorting takes place.

LANGUAGE 

Language (e.g. en_US).

DESTINATIONFILE 

Target file in which the results of the export of the manufacturing data / labeling are stored.
The following formats are supported: txt, xls, xml. The format must be created in accordance with the file name extension specified in CONFIGSCHEME.

RECREPEAT 

Optional: Number of repetitions per label (>=1).
Default value: 1

TASKREPEAT 

Optional: Number of repetitions of total output (>=1).
Default value: 1

SHOWOUTPUT 

Optional: Specifies whether the output file should be displayed.
Default value: 0

USESELECTION

Specifies whether the current selection in the user interface is to be taken into account in connection with the output of the manufacturing data (optional, 0 = No, 1 = Yes).
Default value: 0

Note:

In contrast to the behavior when the manufacturing data / labeling are exported via the EPLAN menu, the label action does not take into account the current selection in the project, but always outputs the data for the entire project. If the current selection in the project is to be considered during the output of the manufacturing data, you have to use the parameter /USESELECTION.

ClosedExample:

 
label 
/PROJECTNAME:C:\Projects\EPLAN\EPLAN_Sample_Project.elk 
/CONFIGSCHEME:config_scheme 
/FILTERSCHEME:filter_scheme 
/SORTSCHEME:sort_scheme 
/LANGUAGE:en_US 
/DESTINATIONFILE:c:\temp\labeling.txt 
/RECREPEAT:3 
/TASKREPEAT:2

Usage of the last configuration scheme: The CONFIGSCHEME parameter is not specified. It is empty.

label 
/PROJECTNAME:C:\Projects\EPLAN\EPLAN_Sample_Project.elk 
/FILTERSCHEME:filter_scheme 
/SORTSCHEME:sort_scheme 
/LANGUAGE:en_US 
/DESTINATIONFILE:c:\temp\labeling.txt 
/RECREPEAT:3 
/TASKREPEAT:2

Carry out exporting of the manufacturing data / labeling without filtering and sorting: In this case the parameters FILTERSCHEME and SORTSCHEME are not transferred.

label 
/PROJECTNAME:C:\Projects\EPLAN\EPLAN_Sample_Project.elk 
/CONFIGSCHEME:config_scheme 
/LANGUAGE:en_US 
/DESTINATIONFILE:c:\temp\labeling.txt 
/RECREPEAT:3 
/TASKREPEAT:2