On insertion of macros and cut or copied devices, you can decide if these schematic elements should be online numbered or not.

Precondition:

You have opened a project.

Specify numbering behavior before insertion

1. Select the following commands: File > Settings > Projects > "Project name" > Devices > Numbering (online).
2. In the On insertion of macros and copies group box, select the Do not modify option.
3. Click [OK].
   
   All the devices that you insert into the schematic via macros or copies are inserted unchanged. The original DTs are retained.

Specify numbering behavior on insertion

If you activate the numbering behavior prompt in the global settings, you can specify a different numbering behavior for devices in macros or copies at each insertion.

1. Select the following commands: File > Settings > Projects > "Project name" > Devices > Numbering (online).
2. In the On insertion of macros and copies group box, select the With prompt option.
3. Click [OK].
4. Paste your copy from the Clipboard into the schematic page. Select the following commands: Tab Home > Command group Clipboard > Insert.
5. Or insert a macro. Select the following commands: Insert center > Breadcrumb trail Home > Window macros / symbol macros. Using the folder structure navigate to the desired window macro / symbol macro and select it by clicking the preview tile.
   
   The macro / copy hangs on the cursor.
6. Move the cursor to the desired location on the schematic page.
7. Click the page to place the copy / macro.
   
   The Insertion mode dialog opens.
8. Select the Do not modify option.
9. Click [OK].
   
   The macro / the copy is placed. The DT is retained unchanged.

See also

Specifying Online Numbering Format

Inserting New Devices Without a DT

Automatically Numbering New Devices

Copying, Cutting, and Pasting Schematic Elements