Dialog Settings: User interface

In this dialog you define various settings for the user interface.

Overview of the main dialog elements:

User interface design:

You can determine whether the user interface is displayed in a light or dark appearance here. If the "Automatic" entry is set, the color setting from the operating system is applied.

However, you can also set the color setting independent from operating system. With the "Dark" entry you select the so called "Dark Mode". In this setting all navigators and dialogs are displayed in dark and the texts in light colors.

Color settings write-protected pages / layout spaces:

You can specify separate color settings for the graphical editor and the 3D view for write-protected pages / layout spaces by using the group box. This allows you to distinguish between such pages and layout spaces and editable pages and layout spaces.

Pages and / or layout spaces are write-protected if an automatic or manual change protection is set for them or when a project has been opened in the "read-only" mode.

Notes:

Write-protected projects are identified in the tree and list representations of the navigators by a gray text background.
Whether an automatic or manual change protection is active for pages / layout spaces is displayed in the dialog Configure protection (command path: Tab Edit > Command group Protection > Configure).

Scheme (2D):

Here, select the color scheme for write-protected pages / layout spaces for the graphical editor. The names of the color schemes specify the color of the screen background.

Shading - background 1 (3D) / Shading - background 2 (3D):

Here you specify the background colors for the shading in the 3D view for write-protected pages / layout spaces: Through the [...] you open the dialog Color selection. Select the desired color there.

Number of recently used projects:

In this field you specify how many entries the list of recently opened projects should have in the Open Backstage view. The number of entries is limited to 25.

When you pin projects, they are displayed in a second list above the most recently opened projects. The value specified in this field also applies to the list of pinned projects. This means that a maximum of 25 recently opened projects and 25 pinned projects can be displayed.

Note:

The lists of the most recently opened and pinned projects are managed separately and are filled when a project is opened or pinned within the Backstage view. If you subsequently increase the value specified here, this does not affect the existing lists.

Minimum width of tiles in preview:

In this field, you enter the width (in pixels) of the "tiles" to be displayed in the symbol selection and in the graphical preview of the page navigator. This width is also used as the minimum height, so that the tiles are as square as possible. The system determines the width of the field and uses the minimum width specified here to calculate how many tiles can be displayed next to each other.

Open most recent projects:

If this check box is selected, EPLAN automatically opens the most recent projects when it next starts up.

If the check box is deactivated, EPLAN will launch the next time the program is started, without a project being opened.

Open most recent page:

If this check box is selected, then the next time it is started, EPLAN automatically opens the most recent page in the graphical editor. This setting only functions when you have also selected the Open most recent project check box.

If this check box is deselected then EPLAN starts without opening the most recent page.

Manage graphical editors project-specifically:

If this check box is activated, a separate graphical editor / 3D view is used for each project, when you work simultaneously in several projects.

If the check box is deactivated, the currently opened page of a project is closed as soon as you change to a page in a different project.

Display identifying numbers:

If this check box is selected, identifying numbers are displayed in the user interface. This is the case, for example, at the following points:

In the list of Properties in the property dialogs, the property numbers are displayed as well. The number of each property is displayed before the property name in angle brackets (e.g. "<20026> Function definition").
Property numbers are also displayed in angle brackets (for example "<0> No") for the specified values by EPLAN in the property dialogs.
The property dialog displays a unique number for the representation type of functions.
A unique message number is displayed in the title bar of the message dialog when a system message occurs.

If the check box is deactivated, the identifying numbers are not displayed.

Behind the name:

If the Display identifying numbers check box is activated, you can specify here whether the number should be shown after the actual property text or representation type. If the check box is selected, the property in the example above will be displayed as follows: "Function definition <20026>".

Reactivate suppressed messages:

In EPLAN, less important messages and dialogs can be suppressed. To do this, the relevant dialogs have a Do not show this dialog again check box. If you have suppressed dialogs then you can reactivate these dialogs here:

If this check box is selected, the suppression of dialogs is removed.

If the check box is deselected, then dialogs and messages that have been suppressed remain suppressed.

Identify multilingual input fields group box

With the settings in this group box you specify whether multilingual input fields in the user interface are identified with a prefixed icon.

Always show icons: All multilingual input fields are identified. The identification is made independent of whether input in the field is possible or the field only serves as a display.
Only show icons for editable input fields: Only those multilingual fields are identified in which an entry is possible.
Never show icons: Multilingual input fields are not identified.