- You have opened a project. You have selected a function in the graphical editor or in a navigator. Popup menu item Properties. Click [...] in the Definition field in the Symbol / function data tab in the Properties <...> dialog.
- Tab Master data > Command group Parts > Management. Select a part and select the Function templates tab. Click [...] in the Function definition field in the table of function templates. (First create a new line if needed.)
- You have opened a project and either opened a symbol in the symbol editor to edit it or you have generated a new symbol. Select the popup menu item Properties and click [...] in the field Function definition of the dialog Symbol properties in the tree view of the page navigator for the symbol.
In this dialog, you can select a function definition. The function definition defines what function the symbol assumes in the schematic. You can browse the tree of function definitions and view the properties of the selected function.
Overview of the main dialog elements:
In this field the existing function definitions are shown in the form of a hierarchically structure tree. Click the sign in front of an entry to open additional layers and display the lowest layer of data in the function definition in both tabs. The function definitions are organized by category and group:
- Trade
- Area
- Category
- Group
- Function definition.
Keep connection point logic of the function:
If this check box is activated, the connection point logic of the function is not changed when another function definition is selected. This way user-defined modifications in the Connection point logic dialog remain.
Tab Attributes
The fields in this tab are for display purposes only and cannot be changed.
This check box is selected if this is a main function. For auxiliary functions, it is deselected.
This check box is activated if the function is a safety function. It is deactivated if the function is a "normal" one that is not relevant for the safety. Safety functions are functions that, for example, take up or trigger a safety-relevant signal. This can, for example, be a PLC safety input or also a contact of a safety device.
Note:
The following case differences are to be taken into consideration with regard to this setting:
- A "safety-function" function template is suitable both for a safety function as well as for a non-safety function in the project. In this case a template overlay takes place.
- A safety function in the project is not suitable for a "non-safety function" function template at the part. In this case a template overlay does not take place.
If a safety function was configured in the project, the part also needs to have a corresponding template. If this is not the case, Message 007001 is issued: "The device uses more functions than provided by the associated part."
This check box is selected if the function isolates signals. It is deselected if the signal is transmitted by the function, which is the case for terminals or pins.
This check box is selected if the function connects nets. It is deselected if the net is interrupted at the function.
The identifier of the function is displayed in this field.
A short descriptive text for the function is displayed here.
For certain functions, there are properties displayed here which are in addition to the properties of normal items, e.g., special terminal or PLC properties.
The fields in this tab are for display purposes only and cannot be changed.
In the table, the following properties are shown for the connection points of the selected function definition:
- Connection point type
- Cable connection point
- Pressure / control port
- Transfer potential to
- Potential type
- Consumer / source to
- Type of signal
- Target tracking (PLC) to
- Number of targets
- Number of saddle jumpers
- Internal / External
- Intrinsic safety possible
- Allow same connection point designations.
The properties are permanently assigned to the function definition and cannot be changed. It is possible, however (in the Connection point logic dialog), to change the connection point properties of a component. The properties entered here are added to the component and subsequently overwrite the properties from the function definition.
Popup menu:
The popup menu provides - depending on the field type (e.g. date, integer, multilingual) - the following menu items that are, depending on the situation, available for influencing the table or editing the values in the fields. You can find an overview of these popup menu items in the section Popup menu items.
See also