You must insert Sockets to ensure that the sensors can be placed by EEC when generating the page. Each socket defines a place on which a sensor (with plug) can be positioned. A macro can contain several sockets, but no more than one plug.
- Select Insert > Graphic > Text....
- Enter the following text for the socket:
#<Socket:Input1>
- Confirm with [OK].
- Position the text on the right above the PLC input, as shown in the following figure:
- Repeat the steps 1 o 5 for each further PLC input, and use ascending numbers for the socket (<Socket:Input2>, <Socket:Input3>, etc.). As an alternative you can copy the existing text several times by using Edit > Duplicate and adapting the texts.