| Overload | Description |
|---|---|
| FUNC_PLCGROUP_STARTADDRESS_2(Int32) | Start address 2 of PLC card # 20255. This property isn't indexed. |
| FUNC_PLCGROUP_STARTADDRESS_2 | Start address 2 of PLC card # 20255. |
| Overload | Description |
|---|---|
| FUNC_PLCGROUP_STARTADDRESS_2(Int32) | Start address 2 of PLC card # 20255. This property isn't indexed. |
| FUNC_PLCGROUP_STARTADDRESS_2 | Start address 2 of PLC card # 20255. |
For PLC cards that have both inputs and outputs, you can use this property to specify a separate start address for the outputs. This way, inputs and outputs can be addressed separately. The start address specifies the default value for the byte address of a PLC card; this is taken into account for automatic addressing. The property is entered on the "PLC box" tab of the property dialog. For this property to be used, the Separate address range for inputs and outputs check box must be deactivated in the PLC-specific settings.