public PropertyValue PART_TERMINAL_TYPEOFTERMINAL_DEFAULT {get; set;}

public:
property PropertyValue^ PART_TERMINAL_TYPEOFTERMINAL_DEFAULT {
   PropertyValue^ get();
   void set (    PropertyValue^ value);
}

Property Value

This property is used if no connection category has been entered for the individual connection point in the connection point pattern. Specifies the connection point type of a connection more exactly:

0 = Undefined

1 = Screw clamp connection single (do not use anymore)

2 = Screw clamp connection double (do not use anymore)

3 = Cage clamp connection (do not use anymore)

4 = Insulation-displacement connection

5 = Screw-type connection (Ring or U cable lug), (do not use anymore)

6 = Ferrule connection (cable lug), (do not use anymore)

7 = Plug connection (do not use anymore)

8 = Conductor plate connection (do not use anymore)

9 = Plug-in connection (Fluid), (do not use anymore)

10 = Nipple (do not use anymore)

11 = Internal thread

12 = External thread

13 = Compression nut (do not use anymore)

14 = Compression fitting (do not use anymore)

15 = User-defined

1015 = Screw connection

1016 = Spring pulley connection

1017 = Push-in connection

1018 = Penetration connection

1019 = Push-in fitting

1020 = Push-wire connection

1021 = Bolt connection

1022 = Flat plug-in connector

1023 = Crimp connection

1024 = Band connection

1025 = Rail connection

1026 = Soldering lug connection

1027 = Wrap post.

Reference

ConnectionPointsInfoPropertyList Class
ConnectionPointsInfoPropertyList Members
Overload List